Re gelcoating a boat

Re - gelcoating has a few differences to painting. Both require the same amount prep and fairing, but the application and finishing is quite different. The principle difference between the two systems is in the final shoot. If you’re sanding a large fiberglass surface, like the hull of a boat, use.

In this episode John teaches us the proper steps to re-gel coat a boat. Using a custom spray gun with a pressurized bottle to spray gelcoat on the decks of two whale watching boats owned by Conscious Breath Adventures, then a touchup gun to finish off the motor wells. I was going to cover it in aqua white with a blue stripe. RE PAINTING RE GELCOATING, ETC, HELP! Below you will find a detailed gel coat preparation guide on how to apply gelcoat to your boat RV or other surface.

Take steps to cover and protect the rest of the boat before starting. When working on the deck or cabin, tarp off the adjacent areas. M and UV tapes , and masking papers are recommended.

The problem with spraying gel coat onto an existing boat rather than into a mold is that you usually get horrendous orange peel. How much does it cost to re -gelcoat the entire exterior? I know some have painted their hulls instead of gelcoating.

If you have a slightly damp hull after a session, just let it air out (like you are doing), or find the leak, if there is one.

I am considering buying a used bass boat , the seller says that it could use a new gelcoat from the docking strip up. The cost at West Marine and Fiberglass Hawaii was in the $1range for a gallon with hardener and surfacer and supplies. Fiberglass boat repair in Clearwater, Tarpon Springs, Tampa, New Port Richey, St. Petersburg, Holiday, and the complete bay.

The boat will look like a million bucks. You mentioned in this post that you are having your boat re -gelcoated. Does re -applied gelcoat last as long as original gelcoat? Gallon may be used to patch, re -gelcoat, or new application.

The Hull Truth - Boating and Fishing Forum. If you want a more durable re -finish to your vessel we can re -gelcoat the entire hull or deck, this is applied by spray or roller to a required thickness, then flattened back and machine polished to a very high gloss, you would think it was just released from its mould! These have all been dug out and repaired.

I am now looking at either painting or re gelcoating the whole inner part of the boat. Any advice would be appreciated. We ensure your repair receives top quality work and is completed in a timely manner. Currently its dark green, which dates the boat a little and I am considering either repainting or re - gelcoating to a different color.

My 29er has some pretty weird valleys and ridges on the hull, dings and nicks, flat spots, etc. Take off all of the old gel coat, fair the bottom, then reapply the gelcoat, probably in a non stock color. We also offer boat re -building for restoration of those much coveted older boats!

Advantage GFR use only high. I am waiting on an estimate for also re gelcoating the outside of the hull. I removed about layers of bottom paint. After sanding the epoxy, it was time to get to gelcoating.

My friend came over to help my dad and me. I taped off all of the hardware. Despite not epoxying the boat again, we decided to go ahead with the gelcoat.

Beyond that, sun and rain will weather away that pretty finish.

Boaters who want to look good all the time will plan to re -wax every few weeks. Next: Watch Getting Tough Stains out of Gel Coat. For an overview of painting projects on all exterior surfaces —topsides, deck, and bottom—read How to Paint a Boat.

If the boat lives in the water then an antifouling coating would be. You can gelcoat right over it, but arent you glassing it into the boat ? All in all, however, gelcoating the floor of your boat is a nice, fairly easy spruce-up for an aging boat.

Clean the floor or deck of the boat. Remove any old glued on carpet, dirt or debris by sanding if necessary. Any estimates on cost for a professional job? The top sides on my 40y boat are getting tire with some cracking, pinpricks and white oxidation (brown hull). I had a good quote for re - gelcoating a couple of.

Color Pro Fiberglass can repair gelcoat or re -gelcoat your vessel. We have over two generations of experience working with gel coating. From a simple compound and buffing to a complete re -application of gelcoating. We can recommend which solution is best for your boat , or personal watercraft.

Does anyone know anything about re gelcoating a fiberglass boat. You either paint or gelcoat, not both. When shooting a new finish (be it paint or gel), you need to remove all the old damaged areas (cracks) first, or they will telegraph through the new finish later. Replacing Thru-Hulls and Seacocks. Actually, re - gelcoating is possible - I have seen it done with beautiful.

A boat refinisher that I spoke to briefly said there were gel products available now that flowed well and did not orange peel badly as they did in the past. To a man, they all said re - gelcoating would be a nightmare. The finish they got on my boat is superb. Lots of preparation neede then spray finish in the right environment. When considering getting your boat re -sprayed with gelcoat,.

Gelcoat Repair and Refinishing.