What kind of water do you mix with antifreeze

I would definatly recomend peak antifreeze. Yes you are supposed to mix it with water. Mixture depends on the type of antifreeze. There are three main types: Ethylene Glycol, Propylene Glycol, and ELC (extended life coolant).

Ethylene glycol is your typical green antifreeze that is ussually the cheapest. And a yearly flush will get rid of most if not all mineral deposits. If you want to avoid deposits alltogether use a brita filter or some such simple device. You will see calcium building up within the block, radiator, and coolant passages.

Use distilled water along with the full. The question comes up: Do I use regular tap water when mixing my coolant and water together? No, you should use distilled water or better yet, de-ionized water.

The reason for this is that tap water has minerals that can deform deposits inside the radiator and the cooling system passages of your engine. It doesn’t matter what kind of water is mixed with the coolant. Be this tap water , distilled water , de-ionized water , bottled water , dog water , etc… As long as the cooling system is maintained on a regular basis, the antifreeze at the proper mixture will prevent any corrosion from ocurring. Author Topic: What kind of water do YOU mix with anti-freeze? While some antifreeze comes premixed with water , allowing you to simply add more as needed– these types of antifreeze can be more expensive.

Others are concentrated and need to be mixed with water to achieve the proper level of cooling for an engine but give you the ability to customize the ratio of water and antifreeze to your climate. If you are unsure of how to achieve this ratio. Safely empty and capture as much of the coolant as possible. A higher water to antifreeze ratio increases the ability of the mix to cool the engine, but the mix will not do very well in cold weather.

A higher antifreeze to water ratio may be beneficial in cold weather because of its lower freezing point ratio, while a lower antifreeze to water mixture will have improved cooling effect in hot weather. Unless you live in extreme weather conditions like here in Alaska or Arizona. Also, be sure to use the correct type of antifreeze. Distilled or Deionized water is basically the best thing you can hope for.

Everything they advertise about coolant is very misleading. Non-Conductive - Yes coolant may be less conductive than distilled water but pure water is actually a very poor conductor. You can mix two different colors of the same kind of coolant without any problem whatsoever.

Do you prefer the newer Pastel color type premix or standard see through color. Most vehicles need a specific ratio of water to antifreeze in order to work properly. In the winter, the correct ratio is usually antifreeze to water. This mix will protect your engine from everything except the most extreme winter weather.

I just went throught his with my last week. Water systems treated with an inhibited glycol will also be protected from algae and bacteria that can grow and degrade the fluid system performance. This brief provides ten basic tips for glycol users in water chilling operations. Do NOT mix different types or brand names of glycol. It is pure enough and will not harm your cooling system.

With the concentrates, you mix a portion of the concentrate with a portion of distilled water to create your coolant. As an example, say we wanted to create a mixture of coolant , and we need to create 10L of coolant. Antifreeze is often available pre-diluted.

Adding the right amount of water provides the needed protection against both freezing and boiling over. No, we have never seen the coolants create a substance like that. When you have that type of mixture in the coolant , it is always oil. Forget the lab and have the oil cooler testes for leakage in hot water. The solution to this water problem is simple, do not purchase the concentrated coolant.

Buy the coolant in a pre- mixed form to eliminate the possibility of any errors. Pre- mixed coolant already contains the distilled water and the proper ratio to make filling your cooling system simple. You no longer have to pre- mix the coolant or guess at what.

We run in all mixed systems since it gets down to as cold as -fahrenheit here. The propolene glycol is not for the high eff aluminum block boilers spotts. A step-by-step guide at choosing the right coolant. You need an aluminum friendly antifreeze for them. Can tap water or bottled water be used for coolant ? Hoping it wouldnt matter too much as it gets mixed with the Anti Freeze.

Chemistry Can you mix anti-freeze types for. Check you coolant level frequently. If you notice a drop in level (from cold to cold) check your coolant cap.

Before you start to refill the system, make sure that you have checked and refitted all the hoses, tightened all the hose clips, and closed all drain taps. Pour in the correct amount of antifreeze , then top up with water or mix the antifreeze solution in a watering-can and use that to pour it in. Mix the coolant with distilled water so that you have a combination of coolant and water. Do not use this or any commercial auto antifreeze to depress the freeze point. If you mix sodium hypochlorite solution (- ) and water to depress the freeze point you end up with a corrosive solution and do not depress the freeze point much.

I recommend you do not do this.