Oil drain plug torque wrench

Giving a dry torque value for your drain plug is almost criminal. Putting dry torque on a thread that has oil on it over-torques and strips it, as you have seen. Torque for oil pan drain plug.

If torque is critical, I use a torque wrench. Using a torque wrench on drain plug How many of you use a torque wrench when you are tightening the drain plug ? In the past I have just tightened it by feel, but this is the first time I have changed the oil in my new WRX and I dont want screw anything up.

All drain plugs that had specs. The reason for the extra torque is because the basic oil pan is designed out of a thicker metal than an aluminum oil pan and can withstand a tighter oil drain plug. Oil Filter and Drain Plug Wrenches When making an oil change, it’s essential to have all of the tools necessary to do the job perfectly.

To do that, you will need oil filter wrenches and a drain plug wrench.

My Volvo has a very easily stripped aluminum pan so torque wrench is a must for the filter and drain plug. Trending price is based on prices over last days. Type in, Stripped Oil Plug. You will most likely find a bunch of posts on this topic.

An nearly all of them will mention the mechanic used a torque wrench to tighten the drain plug. To my knowledge, NO ONE has written a post about stripping a drain plug when NOT using a torque wrench. Is it safe put the oil drain plug back on with just a regualar wrench ? I have always had used vehicles in my life and always just tightened down without a torque wrench. Remove the oil drain plug. To remove the plug use the 13mm wrench or socket and turn the bolt counterclockwise.

Please note that it is easy to confuse the direction that you need to turn the drain plug. Oil plugs can now be removed easily and without the mess of oil spills. Say goodbye to oil soaked gloves or dropping the plug in the drain pan.

Just attach tool to a pre-loosened drain plug and rotate to remove. Lightly oil the new O-ring for the oil filter cap drain valve plug and install it in the groove shown below. Fill Your Cart With Color Today! Get it hand tight with one of those and that will be fine. Believe it or not, I never use a torque wrench just to tighten that oil drain pan.

Using a 13mm socket or wrench , remove the oil pan drain plug. Allow oil to flow into a drain pan. While the oil is draining, remove the engine cover and replace the oil filter element as well as the filter holder O-rings as outlined in Method (Step 3).

The 8-in-SAE oil drain plug swivel wrench set is a Lumax proprietary and patented design. It features socket sizes all in tool. Use the 14mm socket torque wrench to tighten the drain plug until the wrench makes a clicking noise.

Do not over tighten the drain plug with the torque wrench. Too much force could cause the head of the bolt to snap off and become stuck in the engine. For additional protection, take a look at our Magnetic Oil Drain Plug.

Remember to use full synthetic motor oil. MINI recommends 5W-or 5W-FULL SYNTHETIC motor oil. In a critical torque spec like head or cylinder bolts, you would probably want a torque wrench to make sure everything is in tolerance. With an oil drain plug , snug is good.

Instea follow our torque spec. Anyone know the recommended ft-lbs torque for the oil drain plug ? Nothing in the owners guide. I purchased a torque wrench primarily for the lug nuts and since I have it I want to use it for anything else I can. I checked and re-tightened the lugs today.

I tightened the drain plug using the “snug” method. After this thread starte I looked up the torque spec in the manual (lb-ft). I tried a search but there are tons of oil and filter threads to read thru. It is vital that this plug be re-installed properly and does not leak.

To aid with this, your car manufacturer will provide a torque spec for how much pressure needs to be applied to the bolt to seat it properly. A special wrench is neede a torque wrench , to apply the. On rare occasion we read about a poster who lost their engine when the drain plug came free and oil leaked out. If the mechanics involved were required to utilize a properly-set torque wrench , this would not happen. Oh yes that right I stripped the treads on an old bike even to the manufacture specs.

Victory Motorcycles oil change instructions.

In my many decades of oil changes I have never used a torque wrench on an oil drain plug , never stripped one or cross threaded one. How to Change the Oil and Filter on an R11xxrt (oilhead). The most important part of installing an oil drain plug is to ensure that the drain plug is properly tightened and properly torqued. The first oil change was done by the dealer. The drain plug took all my strength to break free.

Glad I purchased a new 17mm point socket. It was like the mechanic did a pull up on the wrench to tighten the plug. What is the function of the crush ring gasket instead of a copper one?

Is there a torque value for the drain plug ? This will help the old oil to completely drain. Place the oil pan under this plug.