How to check tire tread with a penny

Lincolns head in the tread if all of his head sticks out your tire needs to be replaced. There is a simple and no-cost way to check the tread on your tires. With the simple use of an Abe Lincoln penny, you can quickly. When performing the penny tire test, remember not only to check each tire, but to check various places around each tire. Pay special attention to areas that look the most worn.

Reach into your pocket and pull out your spare change. Check your tire tread depth today! Give the penny test a try—it only takes a few minutes—and find out if it’s the right time to replace your tires.

With this easy test, a penny can buy you peace of mind when it comes to your tires and safety. Place a penny head first into several tread grooves across the tire. If you always see the top of Lincoln’s hea your treads are shallow and worn.

If this is the case, your tires need to be replaced.

There are several popular ways to check your tire tread depth. One easy way is the penny test. The penny test is an easy and accurate way to measure tire tread depth.

Take a penny and place it between the tire tread blocks with Lincoln’s head upside down and facing you.

Be sure to insert the penny into various tread grooves across (left to right) and around the tire. To check your tire trea put a penny into any tread groove upside down so Abraham Lincoln’s head is inside the tread. If you can see all of Lincoln’s hea you may need to replace your tire.

You can also perform the same test using George Washington’s head on a quarter. Tire tread depth measures the height of the line extending from the deepest part of the tread void to the top of the tread block. Regularly checking your tire tread depth can help you determine when it is time to replace your tires.

Turn the penny head down and stick it between your tire tread. Tire manufacturer Bridgestone says it’s important to check all of the vehicle’s tires and to place the penny at more than one spot on each tire to get an accurate reading. Take a penny , and place it upside down with Lincoln facing you in the center of the tread (at the thickest part of the tire ). This simple test can help. Checking tire tread with a penny is one of the oldest and most reliable techniques for measuring tread depth.

Before we dive into the Penny Test, though, let’s get a little background on tread wear and what it means for your tires. Tire Tread 1A tire ’s tread is the area around the circumference of the tire where (literally) the rubber meets the road. Worn out tires affect your car’s performance and your safety.

Measuring Tread Depth With the Penny Test. A new car tire typically has a tread depth of 10⁄or 11⁄inches while a light truck will have between 11⁄and 19⁄inches. Instructions on how to properly check tire tread depth can be.

Remember, using the Penny Test to check your tire tread depth is only a guide. It will help give you an idea of when you should bring your car into an auto shop to check the tires and replace them. That is, of course, unless you are an awesome DIY mechanic type. Grab a very shiny penny and a quarter to test.

Place the penny between your thumb and forefinger and select a tire to test. Look at your tire and find the lowest tread area to measure. The lower the tread the more accurate this experiment will be. Learn the Penny Test from Pep Boys.

It’s an easy way to check your tire tread to determine if it’s time for new tires. Blowouts, tread separation, under inflation, and worn treads—the grooves in your tires that offer stability and traction—are some of the tire problems associated with these crashes. A penny is the perfect tool for ensuring that your tire tread is still acceptable. To perform the penny test, place a penny in the channel of your tire ’s tread with Lincoln’s head down into the tire. Insert the edge of a penny into the most worn groove of the tire tread with Lincoln’s head down and facing you.

To do it, take your penny and stick it into a random groove in one of your tires. So for a quick tread check , grab a penny ! If all or part of Lincoln’s head is obscured by the tread , you’re tires still have some life left – but if you can see all of Lincoln’s hea it’s time to replace your tire. Compare the tread depths to determine if they appear the same. Step 3: Measure two or three spots across the tread contact patch of your tire.

Another way to check the tread wear of your tire that is accepted among enthusiast is known as the penny test.

When doing the penny test, check various places around the tire to ensure you have an accurate measurement. Make sure you look closely at those parts of your tread that look worn the most. What if my tires’ tread depth fails the penny test?

If your tire fails the penny test in any spot of the tire tread , you should immediately replace the. The easiest way to check tire depth is to take a penny and stick it between the tread with Lincoln’s head first. If the tread covers any part of Lincoln’s hea you should be good for the season.

The design on a penny makes it a great device to measure tire tread wear. The primary reason to check tire tread involves the on-road safety of you, your passengers, and other cars on the road.