Does seafoam work

SeaFoam is a line of motor treatment products that are designed to clean your car’s insides. That depends on what you want it to do. It will also clean them when I start them back up in the spring. My experience with seafoam was excellent, i noticed a big difference immediately, but I used it in the vaccum lines, and the gas tank.

I ran it through the intake as well. Blows a ton of smoke for awhile, so much that you will think you have destroyed your engine, but after awhile it dissipates. In this video I tested Seafoam. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. Does it really work or just BS?

Seafoam and a tooth brush work really good at cleaning a throttle body. Is seafoam good or bad for diesel engines? Do additives like SeaFoam and Lucas Fuel. When you fill up the tank, it will thoroughly mix in with the gas and work as it should. Sea Foam does work very well.

Yes works good if used in the right way. Knowing about Seafoam, we topped off the small gas tank with a can of Seafoam (over kill on the mix I suppose, but it worked wonders). After a few hours of fishing , the engine ran better than it probably had in years.

Its main function is getting the carbon out of an engine and it works great on strokes and old strokes that have been around for years or abused. Seafoam is one of the “snake oils” that actually works. He has been with Seafoam , I think, the last years, as his doctor told him, his body was just too out of whack, to handle mech work anymore. So I will try to write as much as I remember, from my chicken scratch. I use gumout regane fuel system cleaner for the fuel injector but a friend recommended i use sea foam engine treatment.

Seafoam will work as a fuel stabilizer and also cleans fuel related parts. Another added bonus is it will remove condensation from the fuel.

That alone is better than using isopropyl. Thats my small bit of proof. The solvents in the product soften and dissolve fuel combustion by-product build-ups, such as soot deposits. When used in the intake passageways, they will dislodge built up carbon matter and this is then burned up in the combustion process.

How to Seafoam your engine the RIGHT way:. There’s a lot of misconception out there about products like Seafoam , so let’s start with clarifying the purpose for the product, why you’ll want to use it, and how it’s used. I’ve heard good and bad about seafoam.

I was a mechanic for a decade and we used seafoam all the time after tune-ups and fuel inj. I dont believe you can over use it at all! It does also remove petroleum varnish in the crankcase without over thinning the oil.

In both gas and oil it does bond with suspended moisture and keeps it from separating out. Once you put in the SeaFoam as per the directions, it does a good job.

The Advance Auto Parts core charge presented to you online today with your item is representative of the most common core charge. Seafoam per gallon of pre-mix for the last years or so. An increase in compression almost everytime tells the story.

Do Techron or Seafoam Really Work ? The heads have a fair amount of carbon, so I tried an experiment. Stop Wasting Money on Seafoam ! I figured I should make a thread to try to educate people on Seafoam. Re: How well does seafoam work ! Of course the people who make money off of Seafoam are going to say you should use it. Not only does it help cars function efficiently, it is also turns them to be more environment-friendly.

I have seen both of them work well at stabilizing but I. The only application I have found useful for Seafoam (Spray) is as an inductiion system cleaner. In my opinion it is too thin a solvent for any other application. Although, you may have reduced the octane of the fuel with the Seafoam , and combined with the Eleaning the fuel slightly (due to it requiring more ethanol per volume of air for complete combustion) may have leaned the mix too much. I followed the instructions on the container and seafoam did a great job cleaning a good amount of carbon off the piston head.

I then filled the cylinder with seafoam and it cleaned out of the carbon! After this test, I would recommend seafoam to clean out small engines. Matt, it depends where you put it. Walmart has the best price I have found for the oz. Ship to Store option is a very convenient way to shop from home.

I just changed my oil and added 4oz of SeaFoam to my tank a week ago. I went through the tank of gas, and my bike does seem to run a little bit better. There were many posts, about Seafoam Engine Treatment It is used to clean carbon deposits, and gunk out of crankcase and carbon deposits on valves and IAC motors.